Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Dr Raimund Loser

Abstract

For measuring machines and machine tools, geometrical  accuracy is a key performance criterion. While numerical compensation is well established for CMMs, it is increasingly used on machine tools in addition to mechanical compensation. Why  produce  defective parts if production machines can be tested and improved at the beginning of the process? Find out how to reduce scrap, improve quality and increase productivity with dedicated fast electronic volumetric compensation using a specialised laser tracker and software solution.

Guaranteeing the quality of  manufactured parts is crucial when it comes to avoiding scratch, machine downtime or delays in  the  production.  It  all  depends  on  machine  accuracy, which comes down to the importance of keeping the machine within its required tolerances. Between incorrect setup and worn out or damaged parts, there are a number  of factors that can push a machine out of tolerance, resulting in the production of parts below the expected level of quality.

Traditional methods of checking performance using a linear laser interferometer are accurate, but very time consuming, blocking the machine from use for many hours. In  addition, these methods require specific hardware that cannot be used for other purposes. Electronic volumetric compensation using metrology hardware combined with a specialised software solution offers a new way to not only accelerate the process but also offer a reliable correction solution.

Whitepaper: Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Свяжитесь с нами

Hexagon Manufacturing Intelligence
Commercial Operation Central & Eastern Europe, Middle East and Africa
Strada del Portone, 113
Grugliasco
10095
Italy

Продажи Обслуживание клиентов

Системы лазерных трекеров

В долгосрочных стандартах для промышленной метрологии лазерные трекерные системы определяются в терминах точности, надежности и долговечности портативных...

Измерение на станках

Технические приложения для контроля деталей на станке при обработке от компании Hexagon Manufacturing Intelligence обеспечивают измерение деталей на фрезерных станках,...