Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Dr Raimund Loser


For measuring machines and machine tools, geometrical  accuracy is a key performance criterion. While numerical compensation is well established for CMMs, it is increasingly used on machine tools in addition to mechanical compensation. Why  produce  defective parts if production machines can be tested and improved at the beginning of the process? Find out how to reduce scrap, improve quality and increase productivity with dedicated fast electronic volumetric compensation using a specialised laser tracker and software solution.

Guaranteeing the quality of  manufactured parts is crucial when it comes to avoiding scratch, machine downtime or delays in  the  production.  It  all  depends  on  machine  accuracy, which comes down to the importance of keeping the machine within its required tolerances. Between incorrect setup and worn out or damaged parts, there are a number  of factors that can push a machine out of tolerance, resulting in the production of parts below the expected level of quality.

Traditional methods of checking performance using a linear laser interferometer are accurate, but very time consuming, blocking the machine from use for many hours. In  addition, these methods require specific hardware that cannot be used for other purposes. Electronic volumetric compensation using metrology hardware combined with a specialised software solution offers a new way to not only accelerate the process but also offer a reliable correction solution.

Whitepaper: Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Kontakta oss

Hexagon Manufacturing Intelligence
Filargatan 3
SE-632 29
SE-631 81 

Hexagon Manufacturing Intelligence
Ruskvädersgatan 8
SE-418 34

Växel: +46 16 160800 
+46 16 160803
Mjukvarusupport: +46 16 160813
Mättjänst: +46 16 160814
Försäljning: +46 16 160801
Utbildning: +46 16 160805

Försäljning Tjänster

Laser Tracker

Sedan länge en standard inom industriell mätteknik. Lasertracker-system är marknadsledande när det gäller noggrannhet, driftsäkerhet och hållbarhet i portabla mätutrustningar.

Mätprober för verktygsmaskiner

Lösningar med prober i verktygsmaskiner från Hexagon Metrology mäter upp arbetsstycken i fleroperationsmaskiner, svarvar, fräsar, slipmaskiner, specialmaskiner och robotar....