Tillverkning

High accuracy and speed for large steel part measurement

Vemec is a leading company in the development, production and processing of components for the textile machinery sectors, machine tools, marble and glass processing plants, agricultural machinery and special machinery. Based in Ardesio in the province of Bergamo in Italy, Vemec has over the years specialised in the production of large-sized welded steel parts for companies that do not have facilities for the production of these.

Modern scanning technology for various scanning tasks

ITW Chemnitz was founded in 1992 as one of the first private research institutes established in Saxony after German reunification. In 1995, the business purchased the first model of the then new optoTOP system. This predecessor of modern 3D scanners was the first system based on newly patented miniaturised projection technology, which is used in an improved form in some of Hexagon’s structured light scanners today.

Pioneering composite inspection technology

The Composite Centre of the University of Sheffield’s Advanced Manufacturing Research Centre is a state-of-the-art facility for advanced composite manufacturing research and development. Based in a dedicated extension to the AMRC Factory of the Future, in Rotherham in the United Kingdom, the centre’s research is focused on manufacturing and machining composite components, including hybrid parts that combine high-performance metals and composites in a single structure.

Kvalitet är en självklarhet för LK Precision

LK Precision i Skogås utanför Stockholm utökar sin mätkapacitet med en ny mätmaskin från Hexagon Manufacturing Intelligence.

Portabilitet och flexibilitet för maximal tidsbesparing

Construction Mécanique Badimon (CMB) är ett familjeföretag som i över 30 år har specialiserat sig på mekanisk precisionsbearbetning av mekaniska delar i alla storlekar. Företaget är ISO 9001-/EN 9100-certifierat och har medel och förmåga att framställa produkter av hög kvalitet, däribland verktyg, prototypdelar, delar under förproduktion och delar i små, medelstora och stora serier.

m&h touch probe with chamäleon technology - always adaptable

Because older touch probe models from some providers are no longer available or would be expensive and time-consuming to repair, Kissendorfer is converting to m&h touch probes. Their m&h IRP25.41 Chamäleon model can be adapted to the receiver systems of other manufacturers in existing machines. The ideal replacement, even when a fast remedy is required following a crash.

Clear plus for Accuracy and Productivity

Measurement and calibration in the production process not only increase safety, but also allow the operator to maintain tight tolerances, avoid rework and reduce overall
production time. Through individual cycle programming for Doosan lathes, Hexagon Manufacturing Intelligence has helped to raise production at a leading manufacturer
of cylinder liners to a whole new level for medium-speed four-stroke engine.

Integer porttitor, erat accumsan cursus faucibus, dolor eros euismod ipsum, ac pretium ligula velit at magna. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Sed nunc ipsum, sollicitudin quis orci quis, congue vehicula ipsum. Quisque tristique enim pellentesque interdum aliquam. Donec feugiat lorem in libero feugiat, nec pellentesque neque auctor. Vestibulum vel bibendum augue.

More Speed and More Accuracy With Laser Tool Setters

For years, model and mould construction has been measuring using probes and software by m&h. Now tools are also measured in the machine using m&h laser tool setters – with significant improvements in manufacturing.

Finishing With M & H

The software application NC Gage from m&h finally provides measuring functions on machines with controls from Fanuc and other Japanese manufacturers. In the past it was necessary to time-consumingly undertake inspection manually or on other machines, a process that often involved the risk of errors.

Delivering top levels of Swiss accuracy

A measurement service provider in the small community of Büren an der Aare in the Swiss canton of Berne is pushing the boundaries of 3D metrology, helped by a Leitz Infinity coordinate measuring machine.

Small Company’s Smart Factory With WORKPLAN and RADAN

A sheet metal specialist is a perfect example of how a small company can build a successful digital ecosystem, bringing its factory in line with the Industry 4.0 philosophy of Smart production. 

Modellteknik utökar sitt utbud av tjänster med Absolute Arm från Hexagon

“Det här ska bli smidesverktyget,” säger Peter Zazis och pekar på en CAD-ritning på sin dataskärm. Vi befinner oss på Modellteknik i Eskilstuna, Sverige, och Peter som arbetar som konstruktör visar hur det går till när de arbetar med Reverse Engineering, eller omvänd konstruktion.

Different Cutting Speeds on Same RADAN Nests for Beach

“One of the nicest things about RADAN is that we can program tooling at the part level.” Those are the words of Scheduler and Programmer Sue Conley, of Beach Manufacturing Company (BMC).

Clear plus for Accuracy and Productivity

Measurement and calibration in the production process not only increase safety, but also allow the operator to maintain tight tolerances, avoid rework and reduce overall
production time. Through individual cycle programming for Doosan lathes, Hexagon Manufacturing Intelligence has helped to raise production at a leading manufacturer
of cylinder liners to a whole new level for medium-speed four-stroke engine.

Harvesting Quality

The strategy that has driven over a hundred years of development at agricultural equipment manufacturer CLAAS has been oriented towards innovation from the very origins of the business.

FRÅN MINUTER TILL SEKUNDER EN EFFEKTIVARE MÄTRUTIN FÖR BOCKADE RÖR

Blomberg & Stensson AB i Katrineholm driver en flexibel produktion som tillverkar allt från prototyper till serieproduktion i små och medelstora serier. De erbjuder även konstruktion, pulverlackering och montering. ”Vi är ett litet, ägarlett företag med mycket hjärta,” säger Stefan Edlund, VD och delägare.

Better Cans Thanks To Better Data

KarT sp. z o.o. was founded by Włodzimierz Kardasz in 1983 as a company offering metalworking services to regional entrepreneurs. Over the years, the commitment of the owner and professionalism of the employees have established the company as a reliable, recommendable supplier.

Mätning Vid Spjutspetsen

När det gäller precisionsmätning i en treskiftsprocess kan långsam och arbetskrävande mätteknik vara påfrestande för tålamod och effektivitet. Med ett kvantsprång inom mättekniken har det traditionsrika företaget Stihl i Schwaben nu ökat hastigheten avsevärt för kvalitetstestningen av vevaxlar och vevstakar vid sin huvudanläggning i Waiblingen, Tyskland.

Precisionsmetrologi För Industriell Förfining

Poncin Metal Group är normbildande på franska marknaden för korrugerad plåt och rörbockningar och en expert på arbete med aluminium, galvaniserat och rostfritt stål och erbjuder en rad tjänster och lösningar, alltifrån prototyper till storskalig produktion.

Metrologiska Tillgångar För Exakt Maskinbearbetning

MPEB utgör en del av LLEDO Industries Group och har specialiserat sig på högnoggrann maskinbearbetning av mekaniska delar och utrustning sedan 1989, speciellt inom flygindustrin, kärnindustrin, läkemedelsbranschen och den mikroelektroniska industrin.

Ett Partnerskap Med Hållbar Kvalitet

Velan är en av världens ledande industriventiltillverkare och känd som flaggbärare för kvalitet och innovation. Företaget grundades år 1950 och fortsätter att arbeta med sina teknikkunskaper och toppmoderna innovationer för att utforma exceptionella lösningar för robusta fixturer som uppfyller de kritiska kraven för elproduktion, kemiska och petrokemiska produkter, bensin, gas, massa och papper, gruvning, kryogenik och transportindustrin.

Industrial Measurement with MoveInspect DPA

Deutsche Bahn's vehicle maintenance is conducted at 15 sites assigned to different product areas. The plant in Bremen, which belongs to the product area of diesel multiple units, is among others responsible for restoring the bogies and wheel sets of the vehicles.

Tooled for Success

Spanish firm benefits from high accuracy, increase in productivity and reduction in mould and die manufacturing times

Shape Is All That Matters

When a global hydraulics expert needed to bring tube production to a new site, Hexagon’s Tube Inspection System was a key part of the perfect solution.

A Highly Efficient Metrology Team

To run efficiently, machines require optimised throughput times and freedom from bottlenecks. As a part of quality assurance, this means optimising setup and measuring times and, in particular, reducing the programming time for measuring programs which enable the 3D coordinate measuring machine (CMM) to operate as efficiently.

Greenfield Shows Radan Power to Tomorrow’s Engineers

Specialist CAD/CAM and logistics software from Radan is helping the largest sheet metal subcontractor in the South West of England to compete effectively with manufacturers in Eastern Europe and the Far East.

Radan Intelligent Nesting Vital For Norlec

One of the UK’s largest sheet metal subcontractors says the Project Nesting function in the world’s most powerful sheet metal CAD/CAM software, Radan, is essential for keeping the company competitive.

Radan Means Ups, And No Downs, For Lift Component Manufacturing

Radan CAD/CAM software ensures the design and production process of a lift component manufacturer only has ups…and no downs.

Vätskedynamik

År 2002, startade 3B FLUID POWER SRL som en kontraktsstyrd inspektionsfirma, som i huvudsak arbetar med aerodynamiska komponenter. Gradvis har företaget flyttat till andra branscher, och är nu verksamt inom lantbruk, flygteknik och fordonsteknik. 

Radan “A Springboard” For 5-Axis Laser Pioneers’ Development Plans

The only sheetmetal subcontractor in the Irish Republic to offer 5-axis laser cutting, is using Radan’s specialist Radm-ax module as a springboard to becoming more design-focused.

Alphacam Automation Saves Hours of Programming Time

A leading manufacturer of point of sale and display equipment is looking to expand its range of CNC machining capabilities, and says Alphacam Advanced Router, from Vero Software, is integral to its plans.

3D Quality Control of Plastic Parts

The Wirthwein AG, a well-known German manufacturer of plastic components for the automotive, railway, electronics and home appliances industries as well as for medical science products, employs an AICON  StereoScan in order to process the recorded 3D data of their components for evaluations with respect to geometry, shape and position tolerances and CAD comparisons.

From One Machine To Another

“The first time is always the hardest”. This phrase particularly rings true when you begin to use automated measuring technology. What you really need is a skilled partner and a measuring system that is easy to use. With Hexagon Metrology and the TIGO SF measuring machine, contract manufacturer Köppel AG, from Berneck, Switzerland, gets both.

Gear Manufacturer by Tradition

Experience, specialisation, product customisation – these are the three mainstays of BP Riduttori, a family-owned company based in the province of Venice. A small company but one with great technical expertise, for years many renowned companies in the transport, railway and pharmaceutical industries have relied on BP Riduttori to supply a vast array of gears and gear teeth.

High Precision Stroke for Stroke

Leaving a lasting impression, and imprint, across multiple industries is the goal of BRUDERER AG in Frasnacht, Switzerland. The Leitz PMM-G Coordinate Measuring Machine supports the machine building company with high-precision measurements at automatic stamping presses manufactured with a high degree of precision.

How To Start Serial Production Safely

For the companies in the Eindhoven region in Holland it goes without saying that they have their own clean room. That also applies to Mevi, a company specialising in processes, prototype and test series. For its quality assurance, the family-owned company swears by its Leitz PMM-C 8.10.6 made by Hexagon Metrology.

Meeting the Tightest Sealing Requirements is Top Priority

Creating the best quality products with a perfect seal is the goal of valve manufacturer müller co-ax ag in Forchtenberg, Germany. When the company developed its Quadax® butterfly valves for the regulation and control of different media in the most extreme applications, it needed a new and highly-accurate co-ordinate measuring machine. Installation of the DEA Global Advantage 20.33.15 from Hexagon Metrology has helped the company to reach its goals.

Process Reliability and Quality Are The Maxims

With their own in-house developed grinding machines, for tool maker Paul Horn of Tübingen, in-process on the machine measuring is a key function to ensure precision and efficiency of automated operations. The m&h 41.00-PP production touch probes continuously resist persistent coolant showers and grinding dust abrasion.

Simply Reliable

Large turning/milling centres with a large number of machine components are the metier of Weingärtner Maschinenbau. Radio-wave touch probes from m&h check the accuracy of the machining operations.

Paving the Way to Repeatability and Accuracy

Every gear manufacturing company welcomes growth, but it comes with challenges. They include investing in new equipment to meet capacity, hiring skilled operators if necessary and even finding space to locate the machine.

Surfcam Stops Totomak's Air-Cutting And Speeds Up Machining Cycle Times

Investing in Surfcam, from Vero Software, has improved a Turkish manufacturer’s cycle times by around 10 per cent, without changing any cutting conditions.

Measurement Strategy For Countering The Burden of Time

When it comes to complex gear measurement, slow processes and high programming expenditure can eat away at your patience and efficiency.

Radan Cuts It For HAL’s Laser And Punch Companies

Having one software package covering two different cutting technologies was top of the agenda when an engineering subcontractor specialising in CNC punching bought a company which focused on laser cutting.

Alphacam “Thinks Like An Engineer,” Helping Holm To Develop 4-Axis Work

Shipping around 1,200 different types of parts in a year, an engineering subcontractor says its CAD/CAM software is vital in ensuring a wide range of complex components meets customers’ speedy turn-around requirements, irrespective of whether the production run is large or small.

Radan Nests And Bending “Vital” For KMF

Manufacturing components for such diverse products as premium class aircraft seating, coffee vending machines and electrical distribution boards, the UK’s largest sheetmetal subcontractor says specialist CAM software is vital to nest a range of parts for several customers on the same sheet.

Manufacturing Versatility

Hexagon Manufacturing Intelligence helps component manufacturer deal with diverse customer demands.

Radbend Begins And Ends Radan Returners Process

Laser cutting on a fully automated Bystronic Fiber 3kw machine driven by Radan, now takes precedence over punching, for a leading manufacturer of sheet metal welfare units for construction site and road workers.

Radan Lights The Way For V & F's Multi Bend Tooling

Radan, the powerful CAD/CAM software for sheet metal applications, is lighting the way for an engineering subcontractor to carry out small bends as part of the cutting process on their punch press. V & F Sheet Metal Co. Ltd. manufacture millions of components every year – a number of which involve small bends that can be handled with multi-bend tooling installed on a Trumpf 3000R and programmed with Radan.