HH-A-T2.5 / HH-AS-T2.5 Automatic 2.5° Probe Heads
HH-A-T2.5 and HH-AS-T2.5 - A new degree of freedom
The head is fitted with a kinematic joint (TKJ) which can be connected to a Multiwire to give multi sensor support.
The TKJ can be changed either manually without the need for requalification or automatically with the HR-R tool changer.
All of the probe heads in the range benefit from a completely redesigned drive system including a Hirth Gear for accurate positioning of the probe. The new design delivers the advantage of a high degree of indexable positions and very high rotational torque.
The HH-A-2.5 can either be mounted on the CMM with a shank or flange, alternatively the HH-AS8-2.5 can be mounted on any CMM with an 80mm ram.
- Indexing in steps of 2.5° - 12,240 positions for highest flexibility
- Extensions up to 450mm available
- Extremely high rotation torque - 1.4 NM
|A axis||± 105°|
|B axis||± 180°|
|Rotation speed||90° in 2.5 s|
0.5µm at 100mm from the center of A axis rotation
|Max recommended drive torque||1.4nm|
|Max. extension length||450 mm|
|Head mounting||Shank or Flange||Direct to Ram|
|Probe mounting||TKJ / M8|
HH-C-V2.0 / HH-CA-V2.0 (with HR-R Probe Changer)