PC-DMIS CMM - Transforming CMM metrology
The baseline PC-DMIS CMM package is ideal if you don't need to integrate CAD into your inspection process.
Create inspection programs and evaluate measurement results taking full advantage of the CAD model data.
Sophisticated tools for high speed scanning, sheet metal measurement, part alignment, and so much more.
PC-DMIS CMM leads the way in revolutionizing CMM measurement. It was the first CMM software to:
- Use CAD models in the inspection process.
- Directly link CAD systems and measurement software through its Direct CAD interface (DCI) technology.
- Implement a full set of sheet metal measurement routines tailored for the automotive industry.
- Digitally simulate measurement in an offline virtual CMM environment.
- Easily align complex, contoured parts using our breakthrough iterative alignment technology.
PC-DMIS is available as a retrofit package for most other CMM manufacturers allowing users of non-Hexagon Manufacturing Intelligence CMMs to take advantage of PC-DMIS technology. Hexagon Manufacturing Intelligence Services, Hexagon Manufacturing Intelligence's aftermarket group, has a number of options for upgrading existing equipment ranging from a software retrofit to a complete machine rebuild. We know you have varying requirements and believe you should not have to pay for unwanted features.
Therefore, PC-DMIS CMM comes in three basic configurations with optional modules available to fine-tune to meet specific needs. PC-DMIS is also available in an off-line version for virtual programming. In high volume shops where CMM time is a precious commodity, you need to maximize the time machines spend measuring parts. Now, CMM programmers do most of their part programming off-line and CMMs spend most of their time measuring parts.
PC-DMIS Pro is advanced CMM software without CAD. If you don't use CAD files in inspecting your parts, this software is ideal. PC-DMIS Pro supplies a full-featured metrology software system to take advantage of the most advanced measurement, analytical and reporting capabilities without needing to purchase a set of CAD capabilities.
PC-DMIS Pro features a set of powerful "Quick Start" routines that make fast work of routine operations. The software makes qualifying probes and aligning parts easy. Probe and Go technology makes creating programs on-line as simple as taking points and letting PC-DMIS figure out what is being measured. With tools like these, you'll use your CMM to measure parts not preparing to measure them.
PC-DMIS Pro is not a "stripped down" version of PC-DMIS. It is the full featured PC-DMIS product in every way, with the exception of CAD import. It features a robust, COM-based architecture, an intuitive and configurable Graphical User Interface (GUI), a complete set of powerful measurement routines, and a full set of reporting functions. Plus, it has full PTB and NIST certification.
PC-DMIS Pro uses powerful Wizards to simplify tough jobs. Figuring out the best way to measure a part or to dimension features can be hard work so a set of pre-defined routines make some of the most complex jobs easy. With the Wizards, you can work your way through some of the thorniest metrology problems with a few mouse clicks.
Also, upgrade your software as your needs change. If you have to use CAD in the inspection process, the upgrade is a simple. PC-DMIS Pro is CAD ready, and the only change needed is a simple modification to the portlock program. Best of all, all existing part programs are fully compatible with the new software.
Develop inspection programs using CAD models with PC-DMIS CAD with any kind of model - from simple 2D drawings to the most complex solid 3D models. Import and export CAD data in almost any format and work directly with native CAD models. Plus, powerful CAD-based tools help develop and debug the inspection programs, slashing the time spent writing them by up to 90%.
PC-DMIS adapts CAD capabilities to inspection. This doesn't mean that PC-DMIS CAD is a CAD system - it's a powerful metrology software that fits CAD to the job of inspecting and evaluating parts.
PC-DMIS CAD supports multiple protocols for linking to CAD. It can be neutral like IGES or STEP or it can be CAD system native like UG or CATIA or something in between like DMIS. Whatever the format, PC-DMIS CAD has a solution to handle it.
Built into the baseline packages are pre and post processors supporting widely recognized standard formats like IGES, STEP and DMIS. Translators tailored to specific CAD systems like UG and CATIA are available as options. For the most demanding applications, there are Direct CAD Interfaces (DCIs). DCIs link directly to the CAD database and let customers work directly with their models from PC-DMIS with no translation. No other metrology software comes close to giving users this kind of versatility and flexibility in linking to CAD.
PC-DMIS CAD++ supports the latest technologies and the most demanding applications. Measurement technology is rapidly changing - new devices, applications and techniques are constantly affecting how manufacturers measure and evaluate their parts. Additionally, some industries have their own unique requirements defining what types of features they measure, how they measure them and how they evaluate them.