HH-A / HH-AS Automatic 5° Probe Heads

HH-A-5 and HH-AS-5° - In steps of 5 indexing automatic Probe Heads

HH-A-5 and HH-AS-5
This fully motorized, highly accurate probe head is the universal system component for use with any multicoordinate measuring machine, whatever the model or manufacturer. It can be used with extension bars up to 300 mm long.

Sensors can be connected to the Probe Head with a kinematic joint (HH-A-T5 and HH-AS-T5) or a M8 threaded connection (HH-A-M5 and HH-AS-M5).

The Probe Heads are capable of indexing in 5° increments and can achieve 3024 unique positions.

The Probe Heads are featuring high speed operation and high rotational torque. Sensors can be changed either manually or automatically (with the HR-R probe changer) without the need for requalification.

There are two ways of mounting the probe head to the machine. The HH-A-T5 and HH-A-M5 are equipped with a shank or flange which is fitting to the machine. The HH-AS-T5 and HH-AS-M5 can be mounted directly into any machine with an 80mm or 65mm ram.

About you
About your company
  • 3024 repeatable positions in 5° increments
  • A Axis +90° to -105° B Axis ± 180°
  • High speed operation - 90° in 2 seconds
  • High Torque - 0.6Nm
  • Maximum extension length 300mm
  • HH-A-M5
    • Compatible with all M8 thread extensions and probes
  • HH-A-T5
    • Fully Multiwired TKJ connection
    • Rapid automatic probe change when used with the HR-R rack
  HH-AS6-T5 TKJ 5°  HH-AS6-M5 M8 5°  HH-AS8-T5 TKJ 5°  HH-AS8-M5 M8 5°  HH-AS-T5 TKJ 5°  HH-A-M5 M8 5°
 Indexing Angle  5°
 A axis + 90° to - 115°
 B axis  +- 180°
 Total number of  Positions  3024
 Rotations speed  90° in 2 s
 Positioning  Repeatability  0.5 µm at 100mm from the centre of A Axis rotation
 Max recommended  drive  torque  0.6 Nm
 Maximum Extension  Length  300mm
 Weight  874 g  938 g  780 g
 Head mounting  Probe mounting  Direct to Ram 80mm  Shank/Flange to suit CMM
 Probe mounting TKJ (Multiwire) M8 Thread (2 wires) TKJ (2 wires) M8 Thread (multiwire) TKJ (multwire) M8 Thread (2 wires)
 Head controller  HH-C-V2.0 / HH-CA-V2.0 (with HR-R Automatic Probe Changer)
CMM laser scanners brochure
Styli and Accessories Catalogue