Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Dr Raimund Loser

Abstract

For measuring machines and machine tools, geometrical  accuracy is a key performance criterion. While numerical compensation is well established for CMMs, it is increasingly used on machine tools in addition to mechanical compensation. Why  produce  defective parts if production machines can be tested and improved at the beginning of the process? Find out how to reduce scrap, improve quality and increase productivity with dedicated fast electronic volumetric compensation using a specialised laser tracker and software solution.

Guaranteeing the quality of  manufactured parts is crucial when it comes to avoiding scratch, machine downtime or delays in  the  production.  It  all  depends  on  machine  accuracy, which comes down to the importance of keeping the machine within its required tolerances. Between incorrect setup and worn out or damaged parts, there are a number  of factors that can push a machine out of tolerance, resulting in the production of parts below the expected level of quality.

Traditional methods of checking performance using a linear laser interferometer are accurate, but very time consuming, blocking the machine from use for many hours. In  addition, these methods require specific hardware that cannot be used for other purposes. Electronic volumetric compensation using metrology hardware combined with a specialised software solution offers a new way to not only accelerate the process but also offer a reliable correction solution.

Whitepaper: Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

문의하기

Hexagon Manufacturing Intelligence
A305 Kumgang Penterium, 215 Galmachi-ro, Jungwon-ku 
13217 Seongnam, Gyeonggi-do 
대한민국

전화: +82 31 730 0898
Fax: +82 31 730 0891

영업 고객 기술지원

레이저 트래커 시스템

산업용 측정에 있어서 오랜 기간 동안 표준처럼 자리매김을 해온 레이저 트래커 시스템은 정밀도와 신뢰성, 그리고 내구성 측면에서 이동형 3차원 측정기 시장을 선도하고 있습니다.

머신 툴 프로브

헥사곤 메트롤로지의 머신 툴 프로빙 솔루션을 사용하여 밀링 머신, 머시닝 센터, 선반, 터닝/ 밀링 머신, 연삭기. 특수 기계 및 로봇 등에서 가공 중인 공작물을 측정할 수 있습니다. 작은 공장에서거나 중대형 규모의 생산 공장에서도 공작물이 정렬이 되어 있지 않은 상태에서도 가공 중에 형상을 검사하여야 합니다.