가공, 금형 및 다이

가공, 금형 및 다이를 이용한 정확한 생산을 통해 신속하고 신뢰할 수 있는 제조 프로세스가 가능하도록 합니다.

Unceasing Dedication to Product Quality

Tianjin Motor Dies Co. Ltd., founded in 1995, celebrated its twentieth anniversary in April 2015. Currently, Tianjin Motor Dies has more than ten plants in China and has even set up manufacturing facilities in Germany. The company, one of China's largest motor die manufacturers, has now begun to impact the global dies market in earnest.

Weber_Motorblock

4행정 엔진용 크랭크 케이스의 3D 품질 검사

엔진용 크랭크 케이스는 분당 회전 속도가 최대 10,000rpm에 육박하는 구성 부품들로 채워진, 굉장히 복잡한 기계입니다. 밀리미터 단위의 미세한 정밀도가 필수적인 곳이기도 합니다. 독일 마르크도르프(Markdorf)에 위치한 Weber Motor社는 Weber 그룹 산하 계열사이며 전세계 고객사에 엔진 구성 부품, 엔진 시스템, 온전한 엔진 전체는 물론 섬유질 보강재 복합 재료 구성 부품까지 제작 판매하는 업체로써 40년 전통의 건실하고 신뢰도가 높은 회사입니다. 

Zollern_Guss

정밀 주조의 광학적 품질 관리

측정 작업의 난제인 품질 관리: 정밀 주조 제품의 품질은 초마이크로미터 단위에 좌우되기 때문에  3차원 분석을 거치지 않고는 구성 부품을 관리할 수 없습니다. 
Zollern社는 300년이 넘는 유구한 역사와 전통을 자랑하며 금속 가공 업계를 선도하는 기업입니다. Zollern은 다종다양한 금속 처리 및 가공 기법을 개발하고 연마해 왔는데, 이는 내부 품질 검사를 수행할 때 까다로운 기준을 정립하고 준수해 왔기에 가능했습니다. StereoScan 금형으로 생성한 고정밀 3차원 스캔 데이터 덕분에 왁스 견본과 완성된 주물 부품을 필요한 수준의 효율성과 정확도를 갖추고 검사할 수 있게 되었습니다.

ZF-Friedrichshafen_Scanning

상용 차량의 기어 변속기 케이싱 3D 품질 검사

ZF Friedrichshafen社는 상용 차량의 기어 변속기 제조 업계를 선도하는 회사입니다. 이곳에서는 전 세계 드라이브 라인과 섀시 기술에 적용할 새로운 기술을 개발하고 만들어내고 있습니다. 상용 차량에 쓰이는 복잡한 형태의 기어 변속기 케이싱은 가압 다이캐스팅이라는 방식을 사용하여 알루미늄으로 만들어집니다. 다이캐스트 주형은 CAD 시스템에서 생성된 케이싱 디자인을 기초로 제작되어 케이싱 구성 부품의 형태를 잡는 주형 역할을 합니다.

Mould Complete with Measuring Protocol

Measuring workpieces on the machine has become standard practice at the Saxon milling service provider Hofmann & Engel. The possibility to log work directly on the machine has helped win several orders from mould making and single component manufacturers.

Edgecam Waveform Plays Key Role in Two Product Launches For Fenn Tool

Founded by owner Peter Fenn in 1982, Essex-based Fenn Tool has developed into what is now one of the largest independent cutting tool distributors in the UK. 

Anything But A Bottleneck Coordinate Metrology in Toolmaking

The Corvaglia Group based in Eschlikon in eastern Switzerland is a top performer in every sense. The company is a specialist manufacturer of inexpensive caps and closures for PET bottles. Along with plastic injection moulding, toolmaking has a major role to play at Corvaglia. To avoid toolmaking becoming a bottleneck, Corvaglia calls upon technology from Hexagon Metrology: the team uses a DEA GLOBAL coordinate measuring machine with PC-DMIS software for presetting. The advantage: the electrical discharge machining (EDM) equipment can run non-stop as the operatives set-up the parts away from the machines.

Cannot Do Without It

Ballerstedt, the renowned plastic-injection moulding company, uses probes and Form Inspect software from m&h when constructing their moulds. Mould inserts can now be made to fit accurately and to be easily replaceable. This shortens downtimes and increases productivity.

Eliminating the See-Saw

Innovation and customer benfit, these are the maxims that have established mould maker Hofmann of Lichtenfels enviable reputation. At Hofmann, measuring workpieces while still clamped on the machine has been an everyday occurrence for over seven years. Using touch probes and software from m&h, Hofmann has improved quality and reliability of the production process while speeding up the manufacturing cycle at the same time.

Enormous Time Gains

Measuring contours on the machine tool not only ensures quality but also considerably shortens set-up times and speeds up manufacturing cycles. A mould making and jobbing company reports its experiences using m&h 3D Form Inspect software and proves that quality assurance also reduces manufacturing time.

Five-Axis Parts in Series

The mould production of Color Metal produces mould inserts in an automated facility with a large pallet storage on five-axis machining centres by Grob. For this purpose, the tools are calibrated by an m&h laser and checked for tool breakage.

High Accuracy combined with Flexible Applications

At Jochum, a mould manufacturer, tool length measurements and blade fracture checks are performed on a removable Tool Setter by m&h, even in unmanned shifts. The Tool Setter communicates with the control via the same infrared receiver as the probe.

Lets Do A Quick Calibration

The contract manufacturer SHW Bearbeitungstechnik GmbH has equipped its machining and turning/milling machines with radio-wave touch probes by m&h and regularly calibrates the machine tables with it. That provides accuracy, and the probes save set-up times and allow for an accelerated and secure production of mostly large and complex cast parts.

Measuring for Clear Vision

An Italian manufacturer of injection moulds provides for clear vision in production through measuring workpieces while still clamped on the machining centres. This is achieved by using German m&h touch probes and software on Japanese machine tools.

More Speed and More Accuracy With Laser Tool Setters

For years, model and mould construction has been measuring using probes and software by m&h. Now tools are also measured in the machine using m&h laser tool setters – with significant improvements in manufacturing.

Ingenuity and Courage

An ideal partnership exists when all involved parties benefit from each other. This has been achieved in the partnership between Hexagon Manufacturing Intelligence, a leading provider of technical measurement and production solutions, and Zimmer & Kreim GmbH & Co KG.

Integrated Measurement Technology For Maximum Quality

A power plant somewhere in Europe, in operation for many years or even decades. A component, such as a burner bend, is damaged and needs to be replaced as soon as possible. A spare part is needed immediately, since downtime causes high costs. Schmehmann Rohrverformungstechnik GmbH has the solution.

Absolute Partnership

Expanding the business is Metrolab’s every day focus. Its Managing Director Yogesh V. Amte worked in international automobile product and process design over the last past 12 years and tells us, “When creating Metrolab, we were looking for a strong, quality partner focused on innovation and with great local support to help us fulfil our vision”.

Precision in Partnership

In Hyderabad, India, EQIC is synonymous with the high-quality manufacturing of jigs, fixtures, gauges and press tools. The business owes part of its success to its early adoption of high-quality measurement technology, and is confident that an ongoing relationship with Hexagon Manufacturing Intelligence will be a key part of its future growth and success.

From Sampling to 100% Inspection

Through injection moulding processes, plastic moulded parts can be produced economically and in large quantities. Melted plastic is injected under high pressure into the mould cavities of a tool. By means of electrical heating, hot-runner systems keep the polymer melt flowing on its way to the cavities.

Automation, Innovation and High Precision Machining: a Mould-Maker Relies on WorkNC

A high-volume mould-maker for the French food processing industry says WorkNC, from Vero Software, is an “irreplaceable” asset to their production process. The software helped them to implement a completely automated workshop, freeing up time to take on new projects.

Edgecam’s Waveform “The Only Way To Successfully Cut For Certain Complex Aerospace Applications”

A cutting tool developer partners with Edgecam software to ensure its philosophy of taking customers’ machining challenges off their hands, is always successful.

WorkPLAN Controls 2,000 Projects for Metra

The WorkPLAN ERP solution from Vero Software ensures staff at a precision machining, tooling and mold company are fully aware of workshop costs, by monitoring around 2,000 separate projects annually.

Omni-Stamp create moulds for plastic materials

VISI's Vital Role In High Profile Research Projects for Omni-Stamp

An Italian plastic mould-maker uses a portfolio of VISI CAD/CAM software modules to ensure it stays at the forefront of product development and research.

HxGN LIVE

Hexagon의 연간 국제 컨퍼런스 HxGN LIVE에서는 감동적인 기조 연설, 열린 네트워크, 눈 여겨 보아야하는 첨단 기술들을 제공됩니다.

공구, 주형 및 다이

공구, 몰드, 다이의 정확한 생산으로 신속하고 신뢰할 수 있는 제조 프로세스가 가능하도록 합니다.

문의하기

Hexagon Manufacturing Intelligence
A305 Kumgang Penterium, 215 Galmachi-ro, Jungwon-ku 
13217 Seongnam, Gyeonggi-do 
대한민국

전화: +82 31 730 0898
Fax: +82 31 730 0891

영업 고객 기술지원