Special Geometry

Specialist metrology techniques to support the accurate manufacture of components with complex geometries, challenging material types and other unique applications.

A 3D laser scanner inspecting a sheet metal part. On the section being inspected a red laser can be seen.

금속 스탬핑 자동차 부품 측정의 속도와 정확성 향상

비접촉식 측정 시스템은 판금 스탬핑 자동차 부품의 전체 표면을 캡처할 수 있습니다. 표면 마감과 관계없이 모든 프로파일 피처를 빠르게 측정할 수 있으며, 현장의 까다로운 작업 환경에서도 작동이 가능합니다.

A red rear light housing from a car being inspected by an optical sensor. The casing is mounted on fixture.

차량 헤드라이트 하우징을 위한 고정확 검사

헤드라이트는 차량의 안전한 운행을 위해 매우 중요합니다. 차량 전방 시야를 충분히 확보하고 다른 도로 사용자가 눈부시지 않도록 하려면 차량 헤드라이트 하우징을 정확하게 생산해야 합니다. 이와 같은 고려 사항 외에도 제조업체는 헤드램프와 관련 생산 공정을 보다 지속 가능하고 효율적으로 만들 수 있는 방법을 꾸준히 모색하고 있습니다. 

A 3D laser scanner inspection a knee implant attached to a fixturing kit. On the implant the red laser scanner can be seen on the part being inspected.

무릎 인공관절 임플란트 고정밀 측정

류마티스성 관절염, 골관절염 및 기타 유사한 질환이 있는 환자는 무릎 인공관절 치환술로 인생을 바꿀 수 있습니다. 이와 같은 질환은 정신 및 신체 건강에 영향을 미치고 일상 생활을 방해합니다. 하지만, 무릎 인공관절 임플란트를 사용하면 환자의 통증을 크게 줄이고 향후 수십년 간의 거동이 수월해집니다. 이러한 의료 기기의 안전성과 성능을 보장하기 위해서는 정확도가 높은 검사가 필요합니다. 그러나 효율성 향상 및 비용 절감에 대한 요구가 동시에 늘어나면서 제조업체는이제  무릎 인공관절 임플란트 측정 시 속도와 처리량까지 높여야 합니다.

다극 커넥터를 검사 중인 다중 센서 장비입니다. 위에 겹쳐진 이미지는 측정 소프트웨어의 검사 결과 스크린샷입니다.

다극 커넥터의 다중 센서 측정

자동차 전자 장치, 소비자 전자 장치, 통신, 데이터 기술, 산업 전자 등 다양한 설계 방식과 기술이 적용된 수많은 전기 및 전자 시스템과 커넥터는 신호 전송 및 전원 공급을 보장하는 장치입니다.


치아 임플란트 부품

맞춤형 지대주 블랭크 검사 100% 문서화

High-precision measurement of smartphone lens barrels

The lens barrel plays an important role in the effectiveness of a smartphone’s camera. Accurate measurement of the part is important to ensure that consumer electronics customers’ expectations are met. 

High precision inspection of smartphone camera plastic lenses

In today’s consumer electronics market, customers would consider a smartphone without a camera incomplete. Camera lenses are of course vital to the performance of this feature, but there are a number of challenges when it comes to ensuring the quality of these small plastic parts. The Leitz PMM Gold CMM combines high accuracy and multisensor capability to provide the ideal solution.

High accuracy measurement of mould assemblies for precision plastic lenses

Plastic lenses are ubiquitous in the smartphone market, providing durability and affordability compared to glass. To produce lenses of the quality demanded by today’s consumers, manufacturers need to ensure that mould assemblies for production of these parts fit perfectly.

High Accuracy Inspection of Screw Compressors

Screw compressors are widely used to produce the compressed gases that drives many larger industrial operations worldwide, placing them in constant demand. But because some of their parts have to meet very tight profile tolerances, screw compressor manufacturers looking to increase production throughput cannot afford to sacrifice accuracy.

Optimising Medical Tool Inspection

Medical device manufacturers often require quality checks of dimensional characteristics on parts having different materials that require non-contact measurement. Whether they are inspecting a part created in-house or trying to validate parts from a supplier, manufacturers require a flexible solution that will allow them to measure all kinds of complex features.

Efficient Inspection of Screw Compressor Parts

As one of the most widely used air compressor models on the market, screw compressors are in high demand. With tight tolerances, these parts require an inspection solution that delivers both high accuracy and the fastest possible scanning speeds for maximised throughput.

Quality Assurance of Orthopaedic Implants

The development dynamic of the medical industry is nearly without parallel in any other industry. New materials, production methods, and optimised designs drive innovation in orthopaedic implants for hips, knees and the spinal column. These products are characterised by high geometric accuracy and surface quality, long service life and biocompatibility.

Quality Assurance of Electronic Components

Lead frames are important functional elements of electrotechnical applications. They are cut from a continuous strip of material by progressive composite punches and further processed into metal-plastic composite parts during subsequent procedures. Lead frames can be designed with extremely fine web and slot widths for automated assembly with SMD electronic components.

Premier Class Calibration

Gauges and master parts must be calibrated on a regular basis in order to be used efficiently. The continuing return to national standards is a guarantee for reliable, standard compliant and reproducible measurement results within every manufacturing company. The high-accuracy Leitz Infinity and Leitz Ultra coordinate measuring machines (CMMs) provide the ideal bases for these highly-complex measuring tasks.


Contactless Measurement of Large Lenses

Lenses are precision components, where the smallest deviation from the target geometry results in a change in quality. Quality control can only accompany production if a high-accuracy measuring centre such as the Leitz PMM-Xi from Hexagon Manufacturing Intelligence is used, particularly with large lenses with a diameter greater than 200 mm.