Absolute Camera AAC

High-Speed High-Detail Automated Feature Inspection

A common element found in a wide range of large manufacturing components, particularly in the aerospace sector, are small repetitive features such as drill holes. The ability to inspect such features in a productive way is a challenge that has typically been met with solutions that are slow, inaccurate or both of the above.

The Absolute Camera AAC is a solution specifically designed for automatically inspecting a large number of such small features within a short timeframe. Designed to be mounted on a robot arm or integrated directly within a production machine, the AAC is capable of delivering fast measurement of small features at an extremely fine level of detail that is currently unmatched by alternative non-contact measurement techniques.
The AAC works in combination with the Leica Absolute Tracker AT960 laser tracker and Leica T-Mac sensor as part of a laser tracker automation solution. Use of a Leica T-Scan 5 laser scanner is required to collect initial part orientation data. The laser tracker then provides extremely high-accuracy location data by tracking the T-Mac that is mounted alongside the AAC sensor. This data is then combined with the visual data collected by the AAC sensor and automatically processed within the dedicated Explorer AAC software.

All this comes together to allow for complete small feature measurement and analysis, performed more quickly and accurately than any alternative method.

High-detail small feature inspection – Absolute Camera AAC

당신에 대해
회사에 대해
High-Definition Scanning
The Absolute Camera AAC delivers incredibly fine-detail data for small features, with accuracy to within 10 microns for hole diameter measurements and 20 microns for position measurements.

APODIUS-Absolute-Camera-with-robotHigh-Speed Scanning
A 10 Hertz measurement speed allows the AAC to keep up with robot movement covering up to 100 millimetres per second, allowing a square-metre area of densely populated features to be accurately scanned in less than five minutes.

Large Part Measurement
Working in conjunction with the Leica T-Mac sensor allows the AAC to operate within a measurement volume of up to 60 metres in diameter around the laser tracker.

Small Feature Inspection
The fine detail capability of the AAC allows it to accurately measure even very small features, with accuracy maintained even on drill holes with sub-millimetre diameters.

Automated Reliability
The measurement capabilities of the AAC are built on the established quality and absolute accuracy of the Leica Absolute Tracker AT960, so you have complete confidence in the accuracy of your data.

A Wider Solution
The AAC is fully compatible with a tool changer system, allowing it to be used in conjunction with other AT960 measurement sensors such as touch probes or the Leica T-Scan 5 as part of a complete automated inspection solution.

Dedicated Software
The custom-built AAC Explorer software platform provides complete data processing and analysis functionality specifically designed for fine evaluation of extremely numerous small features such as drill holes, and can communicate with third-party software to facilitate full-part inspection.
APODIUS Absolute Camera AAC Brochure
Composite Inspection Solutions
Absolute Tracker solutions
트래커 제품 카탈로그


Hexagon의 연간 국제 컨퍼런스 HxGN LIVE에서는 감동적인 기조 연설, 열린 네트워크, 눈 여겨 보아야하는 첨단 기술들을 제공됩니다.

Leica Absolute Tracker AT960

Leica Absolute Tracker AT960은 1개의 휴대용 가방으로 운반할 수 있는, 강력한 일체형 레이저 트래커입니다. 빠른 다이내믹 측정을 기본으로 제공하는 AT960은 6자유도(6DoF)의 프로빙, 스캐닝 그리고 리플렉터를 활용한 측정은 물론 자동화 검사를 위한 완벽한 솔루션입니다.

Leica T-Mac

Leica T-Mac(트래터 장치 컨트롤 센서)는 자동화된 애플리케이션용 6DoF 추적 장치로 측정 자동화를 위하여 기존의 T-Probe를 개조하거나 새로이 측정 자동화에 관심이 많은 고객의 니드를 충족시켜줄 수 있는 제품입니다.

Leica T-Scan 5

The Leica Absolute Tracker takes your scanning experience to a new level of excellence in volumes up to 60m (Ø) in a single set-up.

트래커 제품 카탈로그