Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Dr Raimund Loser

Abstract

For measuring machines and machine tools, geometrical  accuracy is a key performance criterion. While numerical compensation is well established for CMMs, it is increasingly used on machine tools in addition to mechanical compensation. Why  produce  defective parts if production machines can be tested and improved at the beginning of the process? Find out how to reduce scrap, improve quality and increase productivity with dedicated fast electronic volumetric compensation using a specialised laser tracker and software solution.

Guaranteeing the quality of  manufactured parts is crucial when it comes to avoiding scratch, machine downtime or delays in  the  production.  It  all  depends  on  machine  accuracy, which comes down to the importance of keeping the machine within its required tolerances. Between incorrect setup and worn out or damaged parts, there are a number  of factors that can push a machine out of tolerance, resulting in the production of parts below the expected level of quality.

Traditional methods of checking performance using a linear laser interferometer are accurate, but very time consuming, blocking the machine from use for many hours. In  addition, these methods require specific hardware that cannot be used for other purposes. Electronic volumetric compensation using metrology hardware combined with a specialised software solution offers a new way to not only accelerate the process but also offer a reliable correction solution.

Whitepaper: Fast electronic volumetric compensation of machine tools with metrology hardware and specialised alignment software

Hexagon Manufacturing Intelligence
Immeuble Le Viking
32 Avenue de la Baltique
91140 Villebon-sur-Yvette
France

T: +33 (0)1 69 29 12 00
F: +33 (0)1 69 29 00 32

SERVICE COMMERCIAL  SERVICE CLIENT

Systèmes laser tracker

Standards de longue date dans la métrologie industrielle, les systèmes laser tracker sont très bien positionnés en termes de précision, fiabilité et durabilité dans le...

Mesure dans la machine-outil

Les systèmes de mesure pour machines-outils de Hexagon Manufacturing Intelligence relèvent les cotes de pièces placées sur des fraiseuses, centres d'usinage, tours,...