m&h Laser Tool Setter LTS35.65

m&h LTS35.65 - the standard Laser Tool Setter

The standard laser tool setter for non-contact tool measurement, for reliable and quick machine setup, tool wear and tool breakage control. A low cost system for the majority of measuring tasks on tools from Ø 0.030 mm, with significant advantages compared to previous common standard instruments. Compared to the conventional systems, the electrical connection is significantly simpler.

An air curtain connection from the on-board pneumatics is all that is required in the majority of cases. Only two spare M functions are required in the control, an aspect that simplifies the electrical installation and keeps down the machine-related costs and effort.


Application:
  • Determination of tool length
  • Measurement of tool radius
  • Detection of broken tools

Benefits:

  • TCS technology (True Cutting Scan) - for the highest precision
  • Smallest tool diameter 8 µm
  • Tool cleaning using Laval nozzle with supersonic pressure
Sizin Hakkınızda
Firmanızla İlgili
STANDARD LASER OPTICS
  • Focal point 50 μm
  • Smallest tool diameter 30 μm
  • Fast tool breakage control under almost all conditions

TCS - TRUE CUTTING SCAN FOR THE HIGHEST PRECISION

Features:

  • Scans the really longest cutting circle
  • Searches the longest cutting circle diameter
  • Uses this to the exact length measurement
  • Correct tool length measurement

Benefits:

  • Determines the real tool length
  • High precision length measurement
  • High-end functionality - exclusively from m&h

TOOL CLEANING USING LAVAL NOZZLE

  • Laval nozzle with supersonic pressure
  • Tool cleaning in measuring position
  • Tool cleaning with nominal rotation speed for optimum cleaning results
  • Minimal cleaning distance
  • Sealing cap prevents penetration of foreign objects and liquid

PNEUMATIC SHUTTER UNIT

  • Complete closing shutter unit
  • Cleaning by air blast without additional air pressure consumption
  • Air curtain during the measuring process prevents soiling of the optic
  • Reliable closing after measuring process
Precision and process reliability
  • Precision measurements of the tool cutting edges at nominal speed
  • Special supersonic cleaning jet prevents incorrect measurements due to adhering material particles
  • Software algorithms eliminate the effects of coolant drops
  • No interference from ambient light

Sturdy design

  • Laser optics protected using shutter unit
  • Air curtain prevents dirt particles entering the device
  • Measurement system sealed according to IP68 standard

Operation suitable for the workshop

  • Simple mounting and setup without special pneumatic unit
  • Simple orientation and mechanical definition of the focal point
  • Simple and reliable calibration and setup of the laser unit

Applications and measuring routines

  • Measurement of the effective length and diameter with nominal speed
  • Length compensation of dynamic changes in tool position
  • Correction of tool length in case of thermal change and thermal drift on the spindle or machine axes
  • Diameter compensation for dynamic changes in the rotational diameter of a tool
  • Detection of tool wear and radius compensation
  • Monitoring of runout, tool change and clamping errors
  • Tool breakage control
  • Individual cutting edge breakage control
 Repeatability  0.1 μm (2 σ)*
 Power supply  24 VDC / max. 500 mA
 Laser  Centrally focused / 639 nm / 1 mW
 Laser safety class   2 (IEC825)
 Temperature range  Operation: 10 °C - 50 °C
 Storage: 5° - 70° C
 Material  Stainless steel
 Protection class  IP68: EN60529 (connected, air-curtain on)
 Material  Stainless steel
 Service life  >1 million ON/OFF cycles tested
m&h Product Overview Brochure
m&h Laser Tool Setters Brochure
Color Metal GmbH - Heitersheim
Case Study Modell- und Formenbau Schmidgall
Case Study 5AXperformance - Kirchheim

HxGN LIVE

Hexagon'un her sene düzenlenen uluslararası konferansı HxGN LIVE, ilham veren konuşmaları ve sınırsız ağ kurma imkanının yanı sıra görülmesi gereken teknolojileri...

Hexagon Metrology Makine Ticaret ve Sanayi Ltd.Sti.
Merkez Ofis, Showroom / Head Office
Alaaddinbey Mah. 636.Sok. No:2
Otomasyon Plaza, NİLTİM, Nilüfer 
16110 Bursa 
Turke

 

Satış Müşteri Hizmetleri