m&h Pick Up Tool Setter IRPT35.40

m&h IRPT35.40 - the tool measuring system stored in the tool magazine!

IRPT3540M
With the Pick Up Tool Setter IRPT35.40, tools can be measured in length and diameter on the machine. The Docking Station can be fitted anywhere on the machine table and enables automatic or manual exchange of the tool setter. This means there is nothing protruding out to restrict the working surface. One infrared receiver is used for both touch probe and tool setter.

Application:
  • Determination of tool length
  • Measurement of tool radius
  • Detection of broken tools

Benefits:

  • HDR (High Data Rate) infrared transmission excludes interference of measuring from ambient light
  • The only tool setter system from the tool magazine
  • Sturdy and durable protected


About you
About your company
HDR - HIGH DATA RATE TECHNOLOGY

Features:

  • Different from worldwide line frequencies of 50 Hz or 60 Hz
  • Transmission frequency of 75 Hz
  • Extremely high data rate of 9600 light pulses/sec
  • Large transmit and receive angle with min. 120°- all around 360°

Benefits:

  • No interference from ambient light
  • Safest infrared transmission
  • Ensures process-reliable automation

THE ONLY TOOL MEASURING SYSTEM FROM THE TOOL MAGAZINE

Features:

  • Smallest infrared tool setter on the market
  • Directly from the tool magazine
  • Highest interchange repeatability into the docking station
  • Calibration with Pick up Calibration tool (patented)

Benefits:

  • Can be shared between machines
  • Fast and automatic remounting
  • No wasted space on the machine table
Innovative solution
  • Length/radius measurement, tool breakage control
  • Tool setter with infrared transmission - no interfering cable in the work area
  • Easily applicable on 5-axis machines
  • Automatic or manual exchange - thus, nothing protrudes into the work area (patented)
  • Tool setter protected in Pick up Calibration tool against falling chips and coolant
  • Only one infrared receiver needed for both tool setter and probe

Operation suitable for the workshop

  • Easy alignment with setting screws
  • User-friendly measuring cycles with dialogue display
  • Calibration with Pick up Calibration tool (patented)

High precision

  • Highest accuracy through precision measuring mechanism
  • Highest interchange repeatability into the docking station
  • Suitable for small tools (from Ø 0.5 mm (0.02") onwards) needing only one measuring touch

Universal mounting of the docking station

  • Easy mounting at the edge of the working table
  • Easy mounting on the machine table
  • Horizontal installation also possible

Sturdy and durable protected

  • Glass ring for protection of infrared diodes
  • Break shaft for protection of the measuring mechanism
  • Probe housing made of stainless steel
  • Water-proof probe sealing using IP68 standard
  • Docking station with chip guard lid

 

 Unidirectional repeatability  2 Sigma 1 μm
 Sensing directions  Radial, axial
 Max. stylus deflection  Radial ±12.5°, axial -5 mm
 Trigger force  XY = 0.6 – 1.0 N, Z = 6 N
 Power supply  1 x 6 V type PX28 or 5 x 1.5 V type LR44
 Protection class  IP68: EN60529
 Temperature range  10 °C – 50 °C
 Material  Stainless steel
 Weight  300g
 Smallest tool for length measurement  Ø 0.3 mm
m&h Styli and Accessories Brochure
m&h Taster für Infrarot Messtastersyteme Broschüre
m&h Tool Setters Brochure

HxGN LIVE

Hexagon’s annual international conference, HxGN LIVE, contains inspiring keynotes, unlimited networking and must-see technologies.