HH-A-H2.5 / HH-AS-H2.5 Automatic HD Probe Heads
HEAVY DUTY - For the most challenging applications
The head is fitted with the Heavy duty kinematic joint (HDKJ), which can be connected to a Multiwire to give full multi sensor support.
The HDKJ carries extensions of up to 750mm. Laser scanners and scanning heads can be supported further from the axis of rotation than with conventional probe heads due to the combination of extreme rotational torque and the HDKJ adaptor.
The HDKJ can be changed either manually without the need for requalification or automatically with the HR-R tool changer fitted with the optional HR-RH Heavy duty module changer.
All of the probe heads in the range benefit from a completely redesigned drive system including a Hirth Gear for accurate positioning of the probe. The new design delivers the advantage of a high degree of indexable positions and very high rotational torque.
The HH-A-2.5 can either be mounted on the CMM with a shank or flange, alternatively the HH-AS8-2.5 can be mounted on any CMM with an 80mm ram.
- Indexing in steps of 2.5° - 20,736 positions for highest flexibility
- Extensions up to 750mm available
- Extremely high rotation torque - 1.7 NM
|A axis||± 180°|
|B axis||± 180°|
|Rotation speed||90° in 2.5 s|
0.5µm at 100mm from the center of A axis rotation
|Max recommended drive torque||1.7nm|
|Max. extension length||750 mm|
|Head mounting||Shank or Flange||Direct to Ram|
HH-C-V2.0 / HH-CA-V2.0 (with HR-R Probe Changer)