HH-A / HH-AS automatic 5° Probe Heads
HH-A-5 and HH-AS-5° - In steps of 5 indexing automatic Probe Heads.
Ready to get started?
Sensors can be connected to the Probe Head with a kinematic joint (HH-A-T5 and HH-AS-T5) or a M8 threaded connection (HH-A-M5 and HH-AS-M5).
The Probe Heads are capable of indexing in 5° increments and can achieve 3024 unique positions.
There are two ways of mounting the probe head to the machine. The HH-A-T5 and HH-A-M5 are equipped with a shank or flange which is fitting to the machine. The HH-AS-T5 and HH-AS-M5 can be mounted directly into any machine with an 80mm or 65mm ram.
-
Features & Benefits
- 3024 repeatable positions in 5° increments
- A Axis +90° to -105° B Axis ± 180°
- High speed operation - 90° in 2 seconds
- High Torque - 0.6Nm
- Maximum extension length 300mm
- HH-A-M5
- Compatible with all M8 thread extensions and probes
- HH-A-T5
- Fully Multiwired TKJ connection
- Rapid automatic probe change when used with the HR-R rack
-
Technical Data
HH-AS6-T5 TKJ 5° HH-AS6-M5 M8 5° HH-AS8-T5 TKJ 5° HH-AS8-M5 M8 5° HH-AS-T5 TKJ 5° HH-A-M5 M8 5° Indexing Angle 5° A axis + 90° to - 115° B axis +- 180° Total number of Positions 3024 Rotations speed 90° in 2 s Positioning Repeatability 0.5 µm at 100mm from the centre of A Axis rotation Max recommended drive torque 0.6 Nm Maximum Extension Length 300mm Weight 874 g 938 g 780 g Head mounting Probe mounting Direct to Ram 80mm Shank/Flange to suit CMM Probe mounting TKJ (Multiwire) M8 Thread (2 wires) TKJ (2 wires) M8 Thread (multiwire) TKJ (multwire) M8 Thread (2 wires) Head controller HH-C-V2.0 / HH-CA-V2.0 (with HR-R Automatic Probe Changer) -
Downloads
-
Buy CMM accessories online
Buy CMM accessories online
Identify your spare parts with confidence and benefit from fast UPS delivery.